User manual

RIGOL Chapter 2 Command System
2-54 DS4000E Programming Guide
:CALCulate:MULTiply
Command List:
 :CALCulate:MULTiply:INVert
 :CALCulate:MULTiply:SA
 :CALCulate:MULTiply:SB
 :CALCulate:MULTiply:VOFFset
 :CALCulate:MULTiply:VSCale
:CALCulate:MULTiply:INVert
Syntax
:CALCulate:MULTiply:INVert <bool>
:CALCulate:MULTiply:INVert?
Description
Enables or disables the invert display of the multiplication operation waveform; or queries the on/off status
of the multiplication operation waveform.
Parameter
Name Type Range Default
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
Remarks
 1|ON: turns the waveform invert on. The waveform voltage values are inverted and then displayed.
 0|OFF: turns the waveform invert off. The waveform is displayed normally.
Return Format
The query returns 1 or 0.
:CALCulate:MULTiply:SA
:CALCulate:MULTiply:SB
Syntax
:CALCulate:MULTiply:SA <source>
:CALCulate:MULTiply:SA?
:CALCulate:MULTiply:SB <source>
:CALCulate:MULTiply:SB?
Description
Sets or queries the channel source of Source A or Source B in multiplication operation.
Parameter
Name Type Range Default
<source> Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4} CHANnel1
Return Format
The query returns CHAN1, CHAN2, CHAN3, or CHAN4.