User manual

RIGOL Chapter 2 Command System
2-40 DS4000E Programming Guide
:CALCulate:ADD:VOFFset
Syntax
:CALCulate:ADD:VOFFset <offs>
:CALCulate:ADD:VOFFset?
Description
Sets or queries the vertical position of the addition operation waveform. The unit is related to the current
amplitude unit of the source channel.
Parameter
Name
Type
Range
Default
<offs> Real
(-40 x vertical scale of the addition operation waveform) to (40
x vertical scale of the addition operation waveform)
0
Return Format
The query returns the vertical position in scientific notation.
:CALCulate:ADD:VSCale
Syntax
:CALCulate:ADD:VSCale <scale>
:CALCulate:ADD:VSCale?
Description
Sets or queries the vertical scale of the addition operation waveform. The unit is related to the current
amplitude unit of the source channel.
Parameter
Name Type Range Default
<scale>
Real
Refer to Remarks
2 V/div
Remarks
The default range of <scale> is from 0.02 V/div to 500 V/div. Its actual range is related to the vertical scale
of the source channel (refer to the :CHANnel<n>:SCALe command), at 1-2-5 step.
Note: After the vertical scale of the source channel is modified, the range of <scale> will not be changed
until the addition operation is re-enabled.
Return Format
The query returns the vertical scale in scientific notation.