User manual

Chapter 2 Command System RIGOL
DS4000E Programming Guide 2-135
Description 2
Measures and queries the overshoot of the specified source channel.
Parameter
Name
Type
Range
Default
<chan>
Discrete
{CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH}
--
Remarks
 Before making measurements, turn on the channels to be measured.
 When the math operation type is FFT (refer to the :CALCulate:MODE command), <chan> cannot be
set to "MATH".
 When [<chan>] is omitted, the command, by default, applies to the currently set measurement source
(refer to the :MEASure:SOURce command).
Return Format
The query returns the measurement results in scientific notation. When the measurement results are
invalid, the query returns 9.9e37.
:MEASure:OVERshoot:SAVerage
:MEASure:OVERshoot:SCURrent
:MEASure:OVERshoot:SDEViation
:MEASure:OVERshoot:SMAXimum
:MEASure:OVERshoot:SMINimum
Syntax 1
:MEASure:OVERshoot:SAVerage [<chan>]
:MEASure:OVERshoot:SCURrent [<chan>]
:MEASure:OVERshoot:SDEViation [<chan>]
:MEASure:OVERshoot:SMAXimum [<chan>]
:MEASure:OVERshoot:SMINimum [<chan>]
Description 1
Measures the overshoot of the specified source channel and enables the statistic function of the
measurement results.
Syntax 2
:MEASure:OVERshoot:SAVerage? [<chan>]
:MEASure:OVERshoot:SCURrent? [<chan>]
:MEASure:OVERshoot:SDEViation? [<chan>]
:MEASure:OVERshoot:SMAXimum? [<chan>]
:MEASure:OVERshoot:SMINimum? [<chan>]
Description 2
Queries the average value, current value, standard deviation, maximum value, or minimum value of the
overshoot measurement results when the overshoot measurement function of the specified source channel
and the statistic function of the measurement results are enabled.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH} --
Remarks
 Before making measurements, turn on the channels to be measured.
 When the math operation type is FFT (refer to the :CALCulate:MODE command), <chan> cannot be
set to "MATH".