User Manual

3 To Set the Horizontal System RIGOL
DS4000 User’s Guide
3-7
 When X-Y mode is enabled, delayed sweep will be disabled automatically.
 The following functions are not available in X-Y mode:
Auto measure, cursor measure, math operation, reference waveform, delayed
sweep, vector display, HORIZONTAL POSITION, trigger control, memory
depth, acquisition mode, Pass/Fail test and waveform record.
Method 2: Use the shortcut measurement function
Please refer to “Phase A→B ” and “Phase A→B ” measurement functions of
“Delay and Phase” on page 6-17.