User Manual

1 Quick Start RIGOL
DS4000 User’s Guide
1-21
 Display: press this key to enter display setting menu to set the display type,
persistence time, brightness, grid type, grid brightness and menu display time of
the waveform.
 Utility: press this key to enter system function setting menu to set the
system-related functions or parameters, such as I/O setting, sound and
language. The oscilloscope also supports some advanced functions such as
pass/fail test and print setting.
 Record: press this key to enter waveform record menu to set the waveform
record and constant on mode.
 Help: press this key to open the help interface. For detailed information, please
refer to the introduction in “To Use the Built-in Help System”.
Record
Play/Pause: in stop or pause state, press this key to play the recorded or paused
waveform and press again to pause the play. The backlight is illuminated in yellow.
Stop: press this key to stop the waveform in record or playback mode. The backlight
is illuminated in orange.
Record: press this key to start recording the waveform. The backlight is illuminated
in red. Besides, the backlight will also be illuminated when record constant on mode
is enabled.
Stop Play/Pause Record