User Manual

RIGOL 1 Quick Start
DS4000 User’s Guide
1-20
Default
Press this key to restore the oscilloscope to its default
configuration.
Print
Press this key to execute print function or save the screen
in the USB storage device. If the oscilloscope is currently
connected to a printer and the printer is in idle state, press
this key to execute print function. If no printer but a USB
storage device is currently connected, press this key to
save the screen to the USB storage device in “.bmp”
format. When printer and USB storage device are
connected at the same time, the printer enjoys higher
priority.
Function Keys
 Measure: press this key to enter measurement setting menu to set the
measurement-related parameters.
 Acquire: press this key to enter sample setting menu to set the acquisition
mode, the memory depth and the antialiasing function of the oscilloscope.
 Storage: press this key to enter file store and recall interface. The file types
available include traces, waveforms, setups, picture and CSV. This instrument
supports internal/external storage as well as disk management.
 Cursor: press this key to enter cursor measurement menu. The oscilloscope
provides three cursor modes (manual, track and auto).