User Manual

16 Specifications RIGOL
DS4000 User’s Guide
16-5
Trigger Condition
SOF, EOF, Frame Type, Frame Error
Baud Rate
10kbps, 20kbps, 33.3kbps, 50kbps, 62.5kbps, 83.3kbps,
100kbps, 125kbps, 250kbps, 500kbps, 800kbps, 1Mbps,
User
Sample Point
5% to 95%
Frame Type
Data, Remote, Error, OverLoad
USB Trigger
Signal Speed
Low Speed, Full Speed
Trigger condition
SOP, EOP, RC, Suspend, Exit Suspend
Measure
Cursor
Manual Mode
Voltage Deviation between Cursors (△ V)
Time Deviation between Cursors (△ T)
Reciprocal of △ T (Hz) (1/△ T)
Track Mode
Voltage and Time Values of the Waveform
Point
Auto Mode
Allow to display cursors during auto
measurement
Auto Measurement
Measurements of Maximum, Minimum, Peak-Peak Value, Top
Value, Bottom Value, Amplitude, Average, Mean Square
Root, Overshoot, Pre-shoot, Frequency, Period, Rise Time,
Fall Time, Positive Pulse Width, Negative Pulse Width,
Positive Duty Cycle, Negative Duty Cycle, Delay AB ,
Delay AB , Phase AB , Phase AB
Number of
Measurements
Display 5 measurements at the same time.
Measurement
Range
Screen or cursor.
Measurement
Statistic
Average, Max, Min, Standard Deviation, Number of
Measurements
Frequency Counter
Hardware 6 bits frequency counter
(channels are selectable)