User Manual

RIGOL 16 Specifications
DS4000 User’s Guide
16-4
Pulse Trigger
Pulse Condition
Positive Pulse Width (greater than, lower than, within
specific interval)
Negative Pulse Width (greater than, lower than, within
specific interval)
Pulse Width Range
4 ns to 4 s
Slope Trigger
Slope Condition
Positive Slope (greater than, lower than, within specific
interval)
Negative Slope (greater than, lower than, within specific
interval)
Time Setting
10 ns to 1 s
Video Trigger
Signal Standard
Support standard NTSC, PAL and SECAM broadcasting
standards; support 480P, 576P, 720P, 1080P and 1080I HDTV
standards
Pattern Trigger
Pattern Setting
H, L, X, Rising Edge, Falling Edge
RS232/UART Trigger
Trigger Condition
Start, Error, Check Error, Data
Baud Rate
2400bps, 4800bps, 9600bps, 19200bps, 38400bps,
57600bps, 115200bps, User
Data Bits
5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition
Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits
7 bit, 10 bit
Address Range
0 to 127, 0 to 1023
Byte Length
1 to 5
SPI Trigger
Trigger Condition
CS, Timeout
Timeout Value
100 ns to 999 ms
Data Bits
4 bit to 32 bit
Data Line Setting
H, L, X
Clock Edge
Rising Edge, Falling Edge
CAN Trigger
Signal Type
Rx, Tx, CAN_H, CAN_L, Differential