User Manual

RIGOL 10 Waveform Record

DS4000 User’s Guide

10-2

Waveform Record

Waveforms from all the channels currently turned on will be recorded during

waveform record.

Press Record  Mode and use to select “Record” to open the waveform record

operation menu.

1. End Frame

Press End Frame and use to set the desired number of frames to be

recorded. The number of frames available is related to the memory depth

currently selected.

2. Record Operation

Waveform recod can be realized via the menu or the shortcut buttons at the

front panel.

Front Panel

Press Operate and select “● ” to

start recoding.

Press ; the backlight goes on (in red)

and starts to flash, indicating that the

record is started.

When the record is finished, “ ● ”

changes to “■” automatically. You

can also select “■” manually.

When the recod is finished, goes off

automatically and goes on (in orange).

You can also press directly.

3. Interval

Set the time interval between the frames in waveform record and the range

available is from 100 ns to 10 s.

Navigation Knob (Playback)

Waveform Record

Play/Pause (Playback)

Stop Recording (Playback)/OFF