User Manual

RIGOL 7 Protocol Decoding
DS4000 User’s Guide
7-4
5. Decoding Table
The decoding table displays the decoded data and the corresponding time in
table format. It can be used to observe relatively longer decoded data to solve
the problem that some data could not be seen clearly on the screen.
Press Event Table  Event Table to select “ON” (note that this operation is
only available when BusStatus is set to “ON”) to enter the decoding table
interface as shown in the figure below. The decoding table lists the decoded
data in time order. If an USB storage device is currently connected to the
instrument, press Export to export the data table to the external USB storage
device in CSV format.