User Manual

RIGOL
DS4000 User’s Guide
XII
Document Overview
1 Quick Start
Provide information about preparations before using the instrument and a brief
introduction of the instrument.
2 To Set the Vertical System
Introduce the functions of the vertical system of the oscilloscope.
3 To Set the Horizontal System
Introduce the functions of the horizontal system of the oscilloscope.
4 To Set the Sample System
Introduce the functions of the sample system of the oscilloscope.
5 To Trigger the Oscilloscope
Introduce the trigger mode, trigger coupling, trigger holdoff, external trigger and
various trigger types of the oscilloscope.
6 To Make Measurements
Introduce how to make math operation, cursor measurement and auto
measurement.
7 Protocol Decoding
Introduce how to decode the input signal using those common protocols.
8 Reference Waveform
Introduce how to compare the input waveform with the reference waveform.
9 Pass/Fail Test
Introduce how to monitor the input signal using the Pass/Fail test.
10 Waveform Record
Introduce how to analyze the input signal using waveform record.
11 Display Control
Introduce how to control the display of the oscilloscope.
12 Store and Recall
Introduce how to store and recall the measurement result and the setting of the