User Manual

6 To Make Measurements RIGOL

DS4000 User’s Guide

6-13

Auto Measurement

DS4000 provides auto measurements of 22 waveform parameters and the statistics

and analysis of the measurement results. What’s more, you can also use the

frequency counter to realize more precise frequency measurement.

Quick Measurement after AUTO

When the oscilloscope is correctly connected and has detected input signal, press

Auto to enable waveform auto setting function and open the following function

menu:

Single-period: measure the “Period” and “Frequency “of the

current signal within a single period and display the measurement

results at the bottom of the screen.

Multi-period: measure the “Period” and “Frequency “of the

current signal within multiple periods and display the

measurement results at the bottom of the screen.

Rise Time: measure the “Rise Time” of the current signal and

display the measurement result at the bottom of the screen.

Fall Time: measure the “Fall Time” of the current signal and

display the measurement result at the bottom of the screen.

Note: auto setting function requires that the frequency of the signal under test

Measure