Datasheet

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentDigital 200 MHz 2-channel 1 null 7 null 8 Bit Calibrated to Manufacturer standards Digital storage (DSO)

Specications

All the specications are guaranteed except parameters marked with “Typical” and the oscilloscope needs to operate for more than 30 minutes under the specied

operation temperature.

RIGOL

Sample Mode Real-time Sample

Real Time Sample Rate

2 GSa/s (single-channel)

1 GSa/s (dual-channel)

Peak Detect

500 ps (single-channel)

1 ns (dual-channel)

Averaging

After both the channels nish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512,

1024, 2048, 4096 or 8192.

High Resolution 12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s).

Memory Depth

single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 56M pts (option) are available

dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available

Input

Number of Channels Two channels

Input Coupling DC, AC or GND

Input Impedance (1MΩ±1%)||(16 pF±3 pF)

or 50 Ω±1.5%

Probe Attenuation Coefcient 0.01X to 1000X, in 1-2-5 step

Maximum Input Voltage (1MΩ) Maximum Input Voltage of the Analog Channel

CAT I 300 Vrms, CAT II 100 Vrms,

Transient Overvoltage 1000 Vpk

with RP2200 10:1 probe: CAT II 300 Vrms

with RP3300A 10:1 probe: CAT II 300 Vrms

with RP3500A 10:1 probe: CAT II 300 Vrms

Horizontal

Timebase Scale DS2302A: 1 ns/div to 1000 s/div

DS2202A: 2.000 ns/div to 1000 s/div

DS2102A/DS2072A : 5.000 ns/div to 1000 s/div

Timebase Accuracy

≤ ± 25 ppm

Clock Drift ≤ ± 5 ppm/year

Max Delay Range Pre-trigger (negative delay): ≥1 screen width

Post-trigger (positive delay): 1 s to 100,000 s

Timebase Mode Y-T, X-Y, Roll, Delayed Sweep

Number of XYs 1

Waveform Capture Rate

50,000 wfms/s (dots display)

Vertical

Bandwidth (-3dB) DS2302A: DC to 300 MHz

DS2202A: DC to 200 MHz

DS2102A: DC to 100 MHz

DS2072A: DC to 70 MHz

Single-shot Bandwidth DS2302A: DC to 300 MHz

DS2202A: DC to 200 MHz

DS2102A: DC to 100 MHz

DS2072A: DC to 70 MHz

Vertical Resolution 8bit

Vertical Scale 500 μV/div to 1 V/div (50Ω)

500 μV/div to 10 V/div (1MΩ)

Offset Range 500 μV /div to 50 mV/div: ± 2 V

51 mV/div to 200 mV/div: ± 10 V

205 mV/div to 2 V/div: ± 50 V

2.05 V/div to 10 V/div: ± 100 V

Bandwidth Limit

DS2302A/DS2202A : 20 MHz/100 MHz

DS2102A/DS2072A : 20 MHz

Low Frequency Response

(AC Coupling, -3dB)

≤5 Hz (on BNC)

Calculated Rise Time

DS2302A: 1.2ns

DS2202A: 1.8 ns

DS2102A: 3.5 ns

DS2072A: 5 ns

DC Gain Accuracy ±2% full scale

Sample