Datasheet
RIGOL
6
Idle Time 16 ns to 4 s
Number of Edges 1 to 65535
Slope Trigger
Slope Condition
Positive Slope (greater than, smaller than, within a specic range)
Negative Slope (greater than, smaller than, within a specic range)
Time Setting 10 ns to 1 s
Video Trigger
Polarity Positive, Negative
Synchrony All Lines, Line Num, Odd Field, Even Field
Standard
standard
:
NTSC, PAL/SECAM, 480P, 576P
optional
:
720P, 1080P, 1080I
Pattern Trigger
Pattern Setting H, L, X, Rising Edge, Falling Edge
Delay Trigger (Optional)
Edge Type Rising, Falling
Delay Type >, <, <>, ><
Delay Time 2 ns to 4 s
TimeOut Trigger (Optional)
Edge Type Rising, Falling, Rising/Falling
Timeout Time 16 ns to 4 s
Duration Trigger (Optional)
Pattern Setting H, L, X
Trigger Criteria >, <, <>
Duration Time 2 ns to 4 s
Setup/Hold Trigger
Edge Type Rising, Falling
Data Type H, L
Setup Time 2 ns to 1 s
Hold Time 2 ns to 1 s
RS232 Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud
2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, 230400 bps, 460800 bps, 921600
bps, 1 Mbps, and User
Data Bits 5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits 7 bits, 8 bits, 10 bits
Address Range 0 to 127, 0 to 255, 0 to 1023
Byte Length 1 to 5
SPI Trigger
Trigger Condition Timeout
Timeout Value 100 ns to 1 s
Data Bits 4 bits to 32 bits
Data Setting H, L, X
CAN Trigger (Optional)
Signal Type Rx, Tx, CAN_H, CAN_L, Differential
Trigger Condition SOF, EOF, Frame Type, Frame Error
Baud
10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps, 1
Mbps, User
Sample Point 5% to 95%