Datasheet
RIGOL
5
Vertical
Bandwidth (-3 dB)
(50 Ω)
DS2102E: DC to 100 MHz
DS2202E: DC to 200 MHz
Single-shot Bandwidth
(50 Ω)
DS2102E: DC to 100 MHz
DS2202E: DC to 200 MHz
Vertical Resolution 8 bit
Vertical Scale
[3]
When the input impedance is 50 Ω: 500 μV/div to 1 V/div
When the input impedance is 1 MΩ: 500 μV/div to 10 V/div
Offset Range
When the input impedance is 50 Ω:
500 μV/div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 1 V/div: ±12 V
When the input impedance is 1 MΩ:
500 μV /div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 2 V/div: ±50 V
2.05 V/div to 10 V/div: ±100 V
Bandwidth Limit
[1]
DS2102E: 20 MHz
DS2202E: 20 MHz/100 MHz
Low Frequency
Response (AC
Coupling, -3 dB)
≤5 Hz (on BNC)
Calculated Rise Time
[1]
DS2102E: 3.5 ns
DS2202E: 1.8 ns
DC Gain Accuracy
[3]
±2% of full scale
DC Offset Accuracy ±0.1 div±2 mV±1% of offset value
Channel to Channel
Isolation
DC to maximum bandwidth: >40 dB
Trigger
Trigger Level Range
Internal ± 5 div from the center of the screen
EXT ±4 V
Trigger Mode Auto, Normal, Single
Holdoff Range 100 ns to 10 s
High Frequency
Rejection
[1]
75 kHz
Low Frequency
Rejection
[1]
75 kHz
Trigger Sensitivity
1 div (below 10 mV or noise rejection enabled)
0.3 div (above 10 mV and noise rejection disabled)
Edge Trigger
Edge Type Rising, Falling, Rising/Falling
Pulse Trigger
Pulse Condition
Positive Pulse Width (greater than, smaller than, within a specic range)
Negative Pulse Width (greater than, smaller than, within a specic range)
Pulse Width 2 ns to 4 s
Runt Trigger
Pulse Condition None, >, <, <>
Pulse Polarity Positive, Negative
Pulse Width Range 2 ns to 4 s
Windows Trigger (Optional)
Windows Type Rising, Falling, Rising/Falling
Trigger Position Enter, Exit, Time
Windows Time 16 ns to 4 s
Nth Edge Trigger (Optional)
Edge Type Rising, Falling