DS2000E Series Digital Oscilloscope 100 MHz and 200 MHz bandwidth models 2 analog channels, 50 Ω input impedance (standard) Vertical range: 500 μV/div ~ 10 V/div Real-time sample rate: up to 1 GSa/s on both channels Memory depth: up to 28 Mpts on both channels Waveform capture rate: up to 50,000 wfms/s Real-time hardware waveform recording, playback, and analysis of up to 65,000 captured frames Various serial trigger and decode (RS232/UART, I2C, SPI, CAN and LIN) Complete connectivity: USB DEVICE, USB Hos
DS2000E Series Digital Oscilloscope Independent Sampling Running Control Area Dedicated Keys and Knob for Waveform Recording, Playback, and Search Independent Channel Control Dedicated Decoding Control Keys Dimensions: W×H×D = 361.6 mm×179.6 mm×130.8 mm Weight: 3.9 kg±0.
Wide range (500 μV/div~10 V/div), low noise floor, clearly capture the low-level signals UltraVision: waveform capture rate up to 50,000 wfms/s UltraVision: high memory depth up to 28 Mpts on both channels UltraVision: multi-level intensity grading display (256-level) UltraVision: real-time and ceaseless waveform recording, playback, and analysis functions Abundant advanced triggering functions (e.g.
RIGOL Probes and Accessories Supported by the DS2000E Series RIGOL Passive Probes Model Type RIGOL Active & Current Probes Description 1X: DC to 35 MHz High10X: DC to 150 MHz impedance Compatibility: All models Probe of RIGOL's digital oscilloscopes PVP2150 1X: DC to 35 MHz High10X: DC to 350 MHz impedance Compatibility: All models Probe of RIGOL's digital oscilloscopes Model Type Description Current Probe RP1001C BW: DC to 300 kHz Maximum Input DC: ±100 A, AC P-P: 200 A, AC RMS: 70 A Compatibility
Specifications All the specifications are guaranteed except the parameters marked with "Typical" and the oscilloscope needs to operate for more than 30 minutes under the specified operation temperature. Sample Sample Mode Real-time Sampling Real-time Sample Rate 1 GSa/s on both channels Peak Detection 500 ps Averaging After all the channels have reached N times of sampling at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, or 8192.
Vertical Bandwidth (-3 dB) (50 Ω) DS2102E: DC to 100 MHz DS2202E: DC to 200 MHz Single-shot Bandwidth DS2102E: DC to 100 MHz (50 Ω) DS2202E: DC to 200 MHz Vertical Resolution Vertical Scale [3] 8 bit When the input impedance is 50 Ω: 500 μV/div to 1 V/div When the input impedance is 1 MΩ: 500 μV/div to 10 V/div Offset Range When the input impedance is 50 Ω: 500 μV/div to 50 mV/div: ±2 V 51 mV/div to 200 mV/div: ±10 V 205 mV/div to 1 V/div: ±12 V When the input impedance is 1 MΩ: 500 μV /div to 50 mV/d
Idle Time 16 ns to 4 s Number of Edges 1 to 65535 Slope Trigger Slope Condition Positive Slope (greater than, smaller than, within a specific range) Negative Slope (greater than, smaller than, within a specific range) Time Setting 10 ns to 1 s Video Trigger Polarity Positive, Negative Synchrony All Lines, Line Num, Odd Field, Even Field Standard standard: NTSC, PAL/SECAM, 480P, 576P optional: 720P, 1080P, 1080I Pattern Trigger Pattern Setting H, L, X, Rising Edge, Falling Edge Delay Trigger
Frame Type Data, Remote, Error, Over Load Error Type Bit Fill, Answer Error, Check Error, Format Error, Random Error USB Trigger (Optional) Baud Low Speed, Full Speed Trigger Condition SOP, EOP, RC, Suspend, Exit Suspend LIN Trigger (Optional) Version 1.X, 2.
I/O Standard Ports USB Host (USB-GPIB supported), USB Device, LAN, Aux Output (TrigOut/PassFail) General Specifications Probe Compensation Output Output Voltage[1] About 3 V, peak-peak Frequency[1] 1 kHz Power Power Voltage 100 V to 240 V, 45 Hz to 440 Hz Power Maximum 50 W Fuse 2 A, T degree, 250 V Environment Temperature Range Cooling Method Humidity Range Operating: 0℃ to +50℃ Non-operating: -40℃ to +70℃ Fan cooled 0℃ to +30℃ : ≤95%RH +30℃ to +40℃ : ≤75%RH +40℃ to +50℃ : ≤45%RH Altitude Op
Order Information Model Standard Accessories Optional Accessories High Memory Depth Option Description Order No.
HEADQUARTER EUROPE NORTH AMERICA JAPAN RIGOL TECHNOLOGIES, INC. No.156,Cai He Village, Sha He Town, Chang Ping District, Beijing, 102206 P.R.China Tel:+86-10-80706688 Fax:+86-10-80720067 Electronic Measurement Instrument service and support email:EMD_support@rigol.com RIGOL TECHNOLOGIES EU GmbH Lindbergh str. 4 82178 Puchheim Germany Tel: 0049- 89/89418950 Email: info-europe@rigol.com RIGOL TECHNOLOGIES, USA INC. 8140 SW Nimbus Ave. Beaverton, OR 97008 Tel: 877-4-RIGOL-1 Email: info@rigol.
