User manual

RIGOL 7 Protocol Decoding
DS2000A User’s Guide
7-8
8. The Error Expression during Decoding
DS2000A makes full use of the resources such as color and view to express the
results of the protocol decoding effectively so as to let users find the desired
information quickly.
End Frame Error:
Errors generated when the end frame condition is not met. When the stop bit is
set to 1.5, red error mark (note that the red mark is displayed in different modes
according to the horizontal time base setting; when the horizontal time base is
relatively smaller, is displayed; otherwise, is displayed) will be displayed if
the stop bit is less than 1.5.
Check Error:
When check bit error is detected during the decoding, red error mark will be
displayed. For example, when the transmitting terminal is set to none check and