User manual

6 To Make Measurements RIGOL
DS2000A Users Guide
6-27
mode, press CursorA and CursorB and use to adjust the horizontal
positions of cursor A and cursor B respectively. Press CursorAB and use
to adjust the horizontal positions of cursor A and B at the same time.
During the adjustment, the measurement result will change accordingly.
The adjustable range is limited within the screen.
Adjust the vertical positions of the cursors:
When the display mode is “Y” or “X-Y” (press SelectCursor to select “Y”)
mode, press CursorA and CursorB and use to adjust the vertical
positions of cursor A and cursor B respectively. Press CursorAB and use
to adjust the vetical positions of cursor A and B at the same time.
During the adjustment, the measurement result will change accordingly.
The adjustable range is limited within the screen.
6. Measurement Example
Use manual cursor measurement to measure the period (X) and frequency
(1/X) of a sine waveform and the result is equal to the result from auto
measurement.
Cursor
Measurement
Auto
Measurement