Specifications

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-211
:OUTPut<n> Commands (For MSO2000A-S/DS2000A-S)
The :OUTPut<n> commands are used to enable or disable the output of the built-in signal source as well
as set its output impedance.
 :OUTPut[<n>][:STATe]
 :OUTPut[<n>]:IMPedance
:OUTPut[<n>][:STATe]
Syntax
:OUTPut[<n>][:STATe] <bool>
:OUTPut[<n>][:STATe]?
Description
Enable or disable the output of the specified signal source channel; or query the output status of the
specified signal source channel.
Parameter
Name Type Range Default
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
<n> Discrete {1|2} 1
Return Format
The query returns 1 or 0.