Specifications

RIGOL 2 Command System
2-134 MSO2000A/DS2000A Programming Guide
:MASK Commands
 :MASK:ENABle
 :MASK:SOURce
 :MASK:OPERate
 :MASK:MDISplay
 :MASK:SOOutput
 :MASK:OUTPut
 :MASK:X
 :MASK:Y
 :MASK:CREate
 :MASK:PASSed?
 :MASK:FAILed?
 :MASK:TOTal?
 :MASK:RESet
 :MASK:DATA
:MASK:ENABle
Syntax
:MASK:ENABle <bool>
:MASK:ENABle?
Description
Enable or disable the pass/fail test function; or query the current status of the pass/fail test function.
Parameter
Name Type Range Default
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
Explanation
In the following states, the pass/fail test function cannot be enabled and this command is invalid.
 In the X-Y time base mode.
 In the ROLL time base mode.
 In the Y-T time base mode, when the horizontal time base is set to 200ms/div or slower and the
instrument enters the slow sweep mode.
 When the waveform recording is enabled.
Return Format
The query returns 1 or 0.