Specifications

RIGOL
DS2000A Quick Guide
19
 The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
), input impedance (e.g. ) and
bandwidth limit (e.g.
).
13. CH2 Vertical Scale
 Display the voltage value per grid of CH2 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
), input impedance (e.g. ) and
bandwidth limit (e.g.
).
14. Source1 Waveform
 Display the type of waveform currently set for Source1.
 When the impedance of the signal source is set to 50 Ω,
will be
displayed at the right of the Source1 waveform.
 When the modulation is enabled,
will be displayed at the right of the
Source1 waveform.
 Only available for DS2000A-S models oscilloscope.
15. Source2 Waveform
 Display the type of waveform currently set for Source1.
 When the impedance of the signal source is set to 50 Ω,
will be
displayed at the right of the Source2 waveform.
 When the modulation is enabled,
will be displayed at the right of the
Source2 waveform.
 Only available for DS2000A-S models oscilloscope.
16. Message Box
Display prompt messages.
17. Notification Area
Display system time, sound icon and USB storage device icon.
 System Time: displayed in “hh:mm (hour:minute)” format. When
printing or storing the waveform, the output file will contain this time
message. Press Utility  System  System Time to set through the
following format:
yyyy-mm-dd hh-mm-ss (year-month-date hour-minute-second)
 Sound Icon: when sound is enabled,
will be displayed. Press Utility 
Sound to enable or disable the sound.
 USB Storage device Icon: when a USB storage device is detected, will
be displayed.
18. Operation MENU
Press any softkey to activate the corresponding menu. The following
symbols might be displayed in the menu:
Denote that at the front panel can be used to select parameter