Specifications

RIGOL
DS2000A Quick Guide
16
Record
Record: press this key to start recording the waveform. The backlight is illuminated
in red. Besides, when record constant on (Open) is enabled, the backlight will also be
illuminated.
Play/Pause: in stop or pause state, press this key to play back the waveform and
press again to pause the play. The backlight is illuminated in yellow.
Stop: press this key to stop the waveform being recorded or being played back. The
backlight is illuminated in orange.
Print
Press this key to execute the print function or save the screen in
the USB storage device. If a PictBridge printer is currently
connected and the printer is in idle state, pressing this key will
execute the print function. If no printer but a USB storage device is
currently connected, pressing this key will save the screen to the
USB storage device in “.bmp” format (if the current storage type is
picture, the screen will be saved in the USB storage device in
picture format). When printer and USB storage device are
connected at the same time, the printer enjoys higher priority.
Stop Play/Pause Record