Specifications

RIGOL
DS2000A Quick Guide
9
5． AC Power Socket
AC power input terminal. The power requirement of this oscilloscope is 100-240
V, 45-440 Hz, CAT II. Use the power cord provided with the accessories to
connect the instrument to AC power. Then, you can press the power key at the
front panel to start the instrument.
6． Lock Hole
You can lock the instrument to a fixed location using the security lock (please
buy it yourself) via the lock hole.
7． Trigger Out
The oscilloscope outputs a signal that can reflect the current capture rate of the
oscilloscope at each trigger via this interface.
8． Signal Output
When Source1 or Source2 is enabled, the signal currently set can be output
through the [Source1] or [Source2] connector at the rear panel to the analog
input terminal of the oscilloscope or external devices connected to them. This
function is only available for DS2000A-S models oscilloscope.