User`s guide

1 Quick Start RIGOL
DS2000 User’s Guide
1-23
Note: in slope trigger, runt trigger and windows trigger, there are two trigger
level labels (
and ).
12. CH1 Vertical Scale
 Display the voltage value per grid of CH1 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
) and bandwidth limit (e.g. ).
13. CH2 Vertical Scale
 Display the voltage value per grid of CH2 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
) and bandwidth limit (e.g. ).
14. Message Box
Display prompt messages.
15. Notification Area
Display system time, sound icon and USB storage device icon.
 System Time: displayed in “hh:mm (hour:minute)” format. When
printing or storing the waveform, the output file will contain this time
message. Press Utility  System  System Time to set through the
following format:
yyyy-mm-dd hh-mm-ss (year-month-date hour-minute-second)
 Sound Icon: when sound is enabled,
will be displayed. Press Utility 
Sound to enable or disable the sound.
 USB Storage device Icon: when a USB storage device is detected, will
be displayed.
16. Operation MENU
Press any softkey to activate the corresponding menu. The following
symbols might be displayed in the menu:
Denote that
at the front panel can be used to select parameter
items. The backlight of
turns on when parameter selection is
valid.
Denote that
can be used to modify parameter values. The
backlight of
turns on when parameter input is valid.
Denote that you can use the Navigation Knob to quickly
adjust/locate parameters.
Denote that you can use
to adjust the parameter and then press
down
to select the parameter.
Denote that the current menu has several options.