User`s guide

RIGOL 1 Quick Start

DS2000 User’s Guide

1-20

Record

Record: press this key to start recording the waveform. The backlight is illuminated

in red. Besides, when record constant on (Open) is enabled, the backlight will also be

illuminated.

Play/Pause: in stop or pause state, press this key to play back the waveform and

press again to pause the play. The backlight is illuminated in yellow.

Stop: press this key to stop the waveform being recorded or being played back. The

backlight is illuminated in orange.

Press this key to execute the print function or save the screen in the

USB storage device. If a PictBridge printer is currently connected

and the printer is in idle state, pressing this key will execute the

print function. If no printer but a USB storage device is currently

connected, pressing this key will save the screen to the USB storage

device in “.bmp” format (if the current storage type is picture, the

screen will be saved in the USB storage device in picture format).

When printer and USB storage device are connected at the same

time, the printer enjoys higher priority.

Stop Play/Pause Record