User`s guide

RIGOL 1 Quick Start
DS2000 User’s Guide
1-18
Knob
Adjust waveform brightness:
In non-menu-operation mode (menu is hidden), turn this
knob to adjust the brightness of waveform display. The
adjustable range is from 0% to 100%. Turn clockwise to
increase the brightness and counterclockwise to reduce.
Press down this knob to reset the brightness to 50%.
You can also press Display  WaveIntensity and use
the knob to adjust the waveform brightness.
Multifunction Knob (the backlight goes on during operation):
In menu operation, press any menu softkey and turn the knob to switch the desired
submenu under this menu and then press down the knob to select the current
submenu. It can also be used to modify parameters and input filename.
Navigation Knob
This knob provides quick Adjust/Locate
function for numerical parameters with
relatively larger settable range. Turn
clockwise (counterclockwise) to
increase (reduce) the value. The inner
knob is used for fine adjustment and
the outer knob for coarse adjustment.
For example, this knob can be used to quickly locate the waveform frame (“Current
Frame” menu) to be played back in the waveform playback function. Similar menus
include trigger holdoff, pulse width setting, slope time etc.