User`s guide

1 Quick Start RIGOL
DS2000 User’s Guide
1-13
oscilloscope at each trigger via this interface.
5. Lock Hole
You can lock the instrument to a fixed location using the security lock (please
buy it yourself) via the lock hole.
6. AC Power Socket
AC power input terminal. The power requirements of this oscilloscope are
100-240 V, 45-440 Hz, CAT II. Use the power cord provided with the accessories
to connect the instrument to AC power. Then, you can press the power key at
the front panel to start the instrument.
7. Fuse
If a new fuse is required, please use the specified fuse (250V, T2A).