User`s guide

12 Store and Recall RIGOL
DS2000 User’s Guide
12-5
Internal Storage and Recall
Internal storage and recall support “Setups” in Storage. In the following part, the
storage and recall method and procedures are introduced.
1. Save the specified oscilloscope setting in internal memory.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press Storage  Storage to select “Setups” and press Save to turn on the
interface as shown in Figure a. use to select “Local Disk” (the characters
turn green) and press down
to open the local disk (Figure b).
Figure a
3) As shown in Figure b, the local disk can store at most 10 setting files. Use
to select the desired storage position, Save is illuminated and then press
the softkey to execute the saving operation. If the current position contains
a file, the original file can be overwritten or be delected by pressing Delete.
Use
to select and then press down to return to the previous
directory.
Figure b