User`s guide

12 Store and Recall RIGOL
DS2000 User’s Guide
12-3
Storage Type
Press Storage  Storage to select the desired storage type. The default is “Traces”.
The storage and recall descriptions of each type are as follows.
1. Traces
Save the waveform data in external memory in “*.trc” format. The data of all the
channels turned on can be saved in the same file. At recall, the data will be
displayed on the screen directly.
2. Waveforms
Save the waveform data in external memory in “*.wfm” format. The stored files
contain the waveform data of the two analog channels and the main setting
information of the oscilloscope and all the data can be recalled.
3. Setups
Save the settings of the oscilloscope in internal or external memory in “*.stp”
format. At most 10 setting files (from LocalSetup0.stp to LocalSetup9.stp) can
be stored in internal memory. The stored settings can be recalled.
4. Picture
Save the screen image in external memory in “*.bmp”, “*.png”, “*.jpeg” or
“*.tiff” format. You can specify the file name and saving directory and save the
corresponding parameter file (*.txt) under the same directory using the same
file name. The recall of image and parameter files is not supported.
After seleting this type:
Press Pic Type to select the desired storage format.
Press Para.Save to enable or disable the parameter save function.
One-key Bitmap Saving
After a USB storage device is connected, press
at the front panel to
quickly save the current screen image under the root directory of the USB
storage device in bitmap format.