User`s guide

RIGOL 10 Waveform Record
DS2000 User’s Guide
10-2
Waveform Record
Waveforms from both the channels currently turned on will be recorded during
waveform record.
Press Utility Record Mode and use to select “Record” to open the
waveform record operation menu.
1. End Frame
Press End Frame and use to set the desired number of frames to be
recorded. The number of frames available is related to the memory depth
currently selected.
2. Record Operation
Waveform recod can be realized via the menu or the shortcut buttons at the
front panel.
Menu Front Panel
Press Operate and select
” to start recoding.
Press ; the backlight goes on (in red) and
starts to flash, indicating that the record is
started.
When the record is
finished, “” changes to
” automatically. You
can also select “
manually.
When the recod is finished,
goes off
automatically and goes on (in orange). You
can also press
directly.
Navigation Knob (Playback)
Waveform Record
Play/Pause (Playback)
Stop Recording
(Playback)/OFF
Utility