User`s guide

6 To Make Measurements RIGOL
DS2000 User’s Guide
6-9
Press MATH  Operate to select “Logic”:
 Press Log.Formula to select the desired operation expression and the default is
“AND”.
 Press Source A and Source B to select the desired channels (CH1 or CH2).
 Press and use to adjust the vertical position of the operation results.
 Press and use to adjust the vertical scale of the operation results.
 Press Invert to turn the inverted display of the operation results on or off.
 Press Threshold A and use to set the threshold of source A in logic
operation.
 Press Threshold B and use to set the threshold of source B in logic
operation.
 HORIZONTAL
POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.