Specifications

RIGOL Chapter 2 Performance Verification Test
DS2000 Performance Verification Guide
2-16
5) Keep other settings unchanged and adjust the amplitude of the fast edge signal to 3 V.
6) Set the vertical scale to 500 mV/div. Measure the zero point offset according to the above
method and record the test result.
7) Turn CH1 off. Repeat the above test steps to measure CH2 and record the test results.
Test Record Form:
Channel
Fast Edge Signal
Amplitude
Vertical Scale
Test Result
Limit
Pass/Fail
CH1
600 mV 100 mV/div
≤ 500 ps
3 V 500 mV/div
CH2
600 mV 100 mV/div
3 V 500 mV/div