Specifications

2 Command System RIGOL
DS2000 Programming Guide
2-69
:BUS<n>:SPI:OFFSet
Syntax
:BUS<n>:SPI:OFFSet <val>
:BUS<n>:SPI:OFFSet?
Description
Set the vertical offset in SPI decoding on bus 1 or 2. Before using this command,
enable the bus display (refer to the
:BUS<n>:DISPlay command).
Query the vertical offset in SPI decoding on bus 1 or 2.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<val> Integer
Normal
[1]
: -166 to 148
Statistic
[2]
: -163 to 143
Half screen
[3]
: -103 to 52
0
Note
[1]
: the screen display is normal and the statistic function is not enabled (refer to
the
:MEASure:STATistic:DISPlay command).
Note
[2]
: the screen display is normal and the statistic function is enabled (refer to
the
:MEASure:STATistic:DISPlay command).
Note
[3]
: the screen is divided into two windows (refer to the :TIMebase:DELay:ENABle
and
:CALCulate:FFT:SPLit commands).
Return Format
The query returns the offset in integer.
Example
:BUS1:SPI:OFFSet 2
The query returns 2.