Specifications

2 Command System RIGOL
DS2000 Programming Guide
2-345
:MEASure:RPHase?
Syntax
:MEASure:RPHase? <chanA>,<chanB>
Description
Query the measurement result of the phase deviation between channels (relative to
the rising edge) and the unit is °.
Parameter
Name Type Range Default
<chanA> Discrete {CHANnel1|CHANnel2} CHANnel1
<chanB> Discrete {CHANnel1|CHANnel2} CHANnel2
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:RPHase? CHANnel1,CHANnel2
The query returns -1.526400e+02.
You can use the following commands to query the statistic maximum, minimum,
current value, average and standard deviation of the phase deviation measurement
(relative to the rising edge) results. Sending the following commands will enable the
statistic function automatically.
 :MEASure:RPHase:SMAXimum?
 :MEASure:RPHase:SMINimum?
 :MEASure:RPHase:SCURrent?
 :MEASure:RPHase:SAVerage?
 :MEASure:RPHase:SDEViation?