Specifications

2 Command System RIGOL
DS2000 Programming Guide
2-339
:MEASure:RDELay?
Syntax
:MEASure:RDELay? <chanA>,<chanB>
Description
Query the measurement result of the delay between channels (relative to the rising
edge) and the unit is s.
Parameter
Name Type Range Default
<chanA> Discrete {CHANnel1|CHANnel2} CHANnel1
<chanB> Discrete {CHANnel1|CHANnel2} CHANnel2
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:RDELay? CHANnel1,CHANnel2
The query returns -4.400000e-04.
You can use the following commands to query the statistic maximum, minimum,
current value, average and standard deviation of the delay measurement (relative to
the rising edge) results. Sending the following commands will enable the statistic
function automatically.
 :MEASure:RDELay:SMAXimum?
 :MEASure:RDELay:SMINimum?
 :MEASure:RDELay:SCURrent?
 :MEASure:RDELay:SAVerage?
 :MEASure:RDELay:SDEViation?