Specifications

RIGOL
DS2000 Quick Guide
12
4． Trigger Out
The oscilloscope outputs a signal that can reflect the current capture rate of the
oscilloscope at each trigger via this interface.
5． Lock Hole
You can lock the instrument to a fixed location using the security lock (please
buy it yourself) via the lock hole.
6． AC Power Socket
AC power input terminal. The power requirement of this oscilloscope is 100-240
V, 45-440 Hz, CAT II. Use the power cord provided with the accessories to
connect the instrument to AC power. Then, you can press the power key at the
front panel to start the instrument.
7． Fuse
If a new fuse is required, please use the specified fuse (250V, T2A).