Specifications

RIGOL
Programming Guide for DS1000B Series
2-23
1. :MEASure:CLEar
Command Format:
:MEASure:CLEar
Function:
The command clears the current measurement parameters.
2. :MEASure:VPP?
Command Format:
:MEASure:VPP?□[<source>]
Function:
The command measures the Peak-Peak value of signal from <source>. The
<source> may be CHANnel1, CHANnel2, CHANnel3 or CHANnel4.
NOTE: “<>” in <source> indicates the source is the paramter that must be set
in the commond; and “[]” indicates the parameter can be set or not set
according to your demand. The followings are the same, don’t repeat. Please
refer to chapter 1 Symbol Instruction about the related explanations.
Return Format:
The query returns 5.280e000, and the unit is V.
3. :MEASure:VMAX?
Command Format:
:MEASure:VMAX?□[<source>]
Function:
The command measures the maximum of signal from <source>. The <source>
may be CHANnel1, CHANnel2, CHANnel3 or CHANnel4.
Return Format:
The query returns 2.640e000, and the unit is V.
4. :MEASure:VMIN?
Command Format:
:MEASure:VMIN?□[<source>]