Specifications

RIGOL
Programming Guide for DS1000B Series
2-4
Function:
The command makes the oscilloscope tests all input waveforms and set the waveforms
automatically to get the optimum conditions to display.
5. :FORCetrig
Command Format:
:FORCetrig
Function:
The command wil produce a trigger signal to force the oscilloscope trigger and
to display a waveform when there is no suitable trigger condition. It is mainly
applicable to the “Normal” and “Single” trigger modes.
6. :Trig%50
Command Format:
:Trig%50
Function:
The command sets the trigger level at the vertical midpoint of the signal amplitude.
7. *RST
Command Format:
*RST
Function:
The command resets the system.
8. *LRN?
Command Format:
*LRN?
Function:
The command queries the system settings. The query returns the data of
system settings in the form of a self-defined character string which could be
downloaded to do the same settings in the future.