User manual

Chapter 12 Signal Source RIGOL
DS1000Z User’s Guide
12-15
off.
 ON: the waveform editor will connect the two points with a straight line.
 OFF: the waveform editor will hold a constant voltage level between two
points and create a step waveform.
3. Zoom
Press Zoom to turn the zoom function on or off.
 ON: only displays the current point in the middle of the waveform editor
window.
 OFF: displays all the initial points in the waveform editor window.
4. Current point
Press CurPoint and use to set the desired points currently edited and the
range available is from 1 to the initial points.
Method one:
Rotate
directly to set the desired points currently edited.
Method two:
Press
to input desired paramrter values and unist directly using the pop-up
numeric keyboard.
5. Voltage
Press Voltage to set the voltage value of the current point and the range
available is from -2.5 V to +2.5 V.