Instructions

Kapitel 16 Technische Daten RIGOL
DS1000Z-E Benutzerhandbuch
7
Auto mode
Allow to display cursors during auto measurement
Auto Measurement
Period, Frequency, Rise Time, Fall Time, Positive Pulse Width,
Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle,
tVmax, tVmin, Positive Rate, Negative Rate, Delay 1→2 , Delay 1→2
, Phase 1→2 , Phase 1→2 , Maximum, Minimum, Peak-Peak
Value, Top Value, Bottom Value, Amplitude, Upper Value, Middle
Value, Lower Value, Average, Vrms, Overshoot, Pre-shoot, Area,
Period Area, Period Vrms, Variance
Number of
Measurements
Display 5 measurements at the same time.
Measurement Range
Screen or cursor
Measurement Statistic
Average, Max, Min, Standard Deviation, Number of Measurements
Counter
Hardware 6-digit counter (channels are selectable)
Math Operation
Waveform Operation
A+B, A-B, A×B, A/B, FFT, A&&B, A||B, A^B, !A, Intg, Diff, Sqrt, Lg,
Ln, Exp, Abs, Filter
FFT Window
Rectangle, Hanning, Blackman, Hamming, Flat Top, Triangle
FFT Mode
Trace, Memory
FFT Display
Half, Full
FFT Vertical Scale
dB/dBm, Vrms
Filter
Low Pass Filter, High Pass Filter, Band Pass Filter, Band Stop Filter
Number of Buses for
Decoding
2
Decoding Type
Parallel, RS232/UART, I2C, SPI
Display
Screen Type
7.0-inch TFT LCD display
Display Resolution
800 horizontal × RGB × 480 vertical pixel
Display Color
16 million color (24-bit true color)
Persistence Time
Min, 100 ms, 200 ms, 500 ms, 1 s, 5 s, 10 s, Infinite
Display Type
Dots, Vector
I/O
Standard Ports
USB Host, USB Device, LAN, Aux Output (TrigOut/PassFail)