Manualshelf

User`s guide

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentDigital 70 MHz 4-channel 1 null 8 null 8 Bit Digital storage (DSO)
21222324252627282930
RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
1-11
To Display a Signal Automatically
The oscilloscope has an automated feature to display the input signal best-fit. The
input signal should be 50Hz or higher and a duty cycle is greater than 1%.
Press the AUTO button, the oscilloscope automatically sets up VERTICAL,
HORIZONTAL and TRIGGER controls to display the input signal. Adjust the controls
manually to get the best results if necessary.
Connect a signal to the Channel 1 (CH1).
1. Connect a signal to the oscilloscope as described above.
2. Press AUTO.
The oscilloscope may change the current settings to display the signal; and adjusts
the vertical and horizontal scaling, the trigger coupling, type, position, slope, level,
and mode.