User`s guide

Chapter 6 To Make Measurements RIGOL
DS1000Z User’s Guide
5-17
with interlacing sweep.
 480P: the frame frequency is 60 frames per second; the TV sweep line is 525;
line-by-line sweep; the line frequency is 31.5 kHz.
 576P: the frame frequency is 60 frames per second; the TV sweep line is 625;
line-by-line sweep.
Trigger Mode:
Press Sweep to select the “Trigger Mode” under this trigger type as auto, normal
or single. The corresponding status light of the current trigger mode turns on.
Trigger Setting:
Press Setting to set the trigger parameter (noise rejection) under this trigger type.
Trigger Level:
Use TRIGGER LEVEL to modify the level. For details, please refer to the
description of “
Trigger Level” on page 5-9.