Manualshelf

User`s guide

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentDigital 70 MHz 4-channel 1 null 8 null 8 Bit Digital storage (DSO)
81828384858687888990
RIGOL Chapter 6 To Make Measurements
DS1000Z User’s Guide
5-6
Trigger Holdoff
Trigger holdoff can be used to stably trigger the complex waveforms (such as pulse
series). Holdoff time is the amount of time that the oscilloscope waits before
re-arming the trigger circuitry. The oscilloscope will not trigger until the holdoff time
expires.
Figure 5-2 Trigger Holdoff
Press MENU Setting Holdoff in the trigger control area (TRIGGER) at the
front panel and use to modify the holdoff time (the default is 16 ns) until the
waveform triggers stably. The adjustable range of holdoff time is from 16 ns to 10 s.
Note that trigger holdoff is not available for video trigger.
Trigger Holdoff Time
Trigger
Positions