User`s guide

RIGOL Chapter 1 Quick Start
DS1000Z User’s Guide
1-24
Parameter Setting Methods
DS1000Z supports the following two parameter setting methods.
Method 1:
For parameters displayed with
in the menu, rotate the multifunction knob
directly to set the desired value.
Method 2:
For parameters displayed with
in the menu, press the multifunction knob
and the numeric keyboard as shwon in the ficure below is displayed. Rotate the knob
to seelct the desired number and press the knob to input the number. After inputting
all the numbers, rotate the knob to select the desired unit and press the knob to
finish the parameter setting.
Figure 1-13 Numeric Keyboard
Note: When using the numeric keyboard to input a parameter value, the length of
the value cannot exceed 10 digits. Otherwise, “DEL” will be selected automatically
and the input value will be deleted when you press knob again.