User`s guide

RIGOL Chapter 1 Quick Start
DS1000Z User’s Guide
1-22
13. CH2 Vertical Scale
 Display the voltage value per grid of CH2 waveform vertically.
 Press CH2 to select CH2 and use VIRTICAL
SCALE to modify this
parameter.
 The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
) and bandwidth limit (e.g. ).
14. CH3 Vertical Scale
 Display the voltage value per grid of CH3 waveform vertically.
 Press CH3 to select CH3 and use VIRTICAL
SCALE to modify this
parameter.
 The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
) and bandwidth limit (e.g. ).
15. CH4 Vertical Scale
 Display the voltage value per grid of CH4 waveform vertically.
 Press CH4 to select CH4 and use VIRTICAL
SCALE to modify this
parameter.
 The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
) and bandwidth limit (e.g. ).
16. Message Box
Display prompt messages.
17. Source1 Waveform
 Display the type of waveform currently set for Source1.
 When the modulation of Source1 is enabled,
will be displayed at the
bottom of the Source1 waveform.
 When the impedance of Source1 is set to 50 Ω,
will be displayed at the
bottom of the Source1 waveform.
 Only available to DS1104Z-S and DS1074Z-S.
18. Source2 Waveform
 Display the type of waveform currently set for Source1.
 When the modulation of Source2 is enabled,
will be displayed at the
bottom of the Source2 waveform.
 When the impedance of Source2 is set to 50 Ω,
will be displayed at the
bottom of the Source2 waveform.
 Only available to DS1104Z-S and DS1074Z-S.
19. Notification Area
Display system time, sound icon and USB disk icon.
 Sound Icon: when sound is enabled,
will be displayed. Press Utility 
Sound to enable or disable the sound.
 USB Disk Icon: when a USB disk is detected, will be displayed.
20. Operation MENU
Press any softkey to activate the corresponding menu.