Manualshelf

User`s guide

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentDigital 70 MHz 4-channel 1 null 8 null 8 Bit Digital storage (DSO)
31323334353637383940
Chapter 1 Quick Start RIGOL
DS1000Z User’s Guide
1-7
To Connect the Probe
RIGOL provides passive probe for the DS1000Z series oscilloscopes, as shown in the
table below. For detailed technical information of the probe, please refer to the
corresponding Probe User’s Guide.
Model Description
RP2200 150 MHz, passive probe, standard
Connect the Probe:
1. Connect the BNC terminal of the probe to a channel BNC connector of the
oscilloscope at the front panel.
2. First connect the ground alligator clip of the probe to the circuit ground terminal
and then connect the probe tip to the circuit point to be tested.
Figure 1-6 To Connect the Probe