User`s guide

RIGOL Chapter 14 System Function Setting
DS1000Z User’s Guide
14-8
System Information
Press Utility  System  System Info. to view the version information of your
oscilloscope. The system information contains the following contents as shown in the
figure below.
Figure 14-1 System Information
Power-on Recall
You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off. Press Utility  System  Power On Set to select “Last”
(default) or “Default”.
 Last: return to the setting of the system at last power-off.
 Default: return to the factory setting of the system.