User`s guide

RIGOL Chapter 14 System Function Setting
DS1000Z User’s Guide
14-6
To Select USB Device
Press Utility  IO Setting  USB Device to select the type of the device
(“Computer” or “PictBridge “) to be connected to the USB Device interface. The
default is “Computer”. When “computer” is selected, the instrument can
communicate with the PC; when “PictBridge” is selected, you can print the content
displayed on the screen using the PictBridge printer.
To Set the GPIB Address
When using the GPIB mode to control the oscilloscope, you have to use the
USB-GPIB interface converter (order it separartely) to extend a GPIB interface for the
oscilloscope.
To set the GPIB address of this interface, press Utility  IO Setting  GPIB and
use to input the desired address. The default is 1 and the range is from 1 to 30.