User`s guide

RIGOL Chapter 14 System Function Setting
DS1000Z User’s Guide
14-4
from 0 to 255. You are recommended to ask your network administrator for an
IP address available.
Press IP Address and use to input the desired IP address. This setting will
be saved in the non-volatile memory and if “Power-on Recall
” is set to “Last”
and DHCP and Auto IP are “Off”, the oscilloscope will load the preset IP
address automatically at the next power-on.
2. Set the Subnet Mask
The format of the subnet mask is nnn.nnn.nnn.nnn; wherein, the range of the
nnn is from 0 to 255. You are recommended to ask your network administrator
for a subnet mask available.
Press Mask and use to input the desired subnet mask. This setting will be
saved in the non-volatile memory and if “Power-on Recall
” is set to “Last” and
DHCP and Auto IP are “Off”, the oscilloscope will load the preset subnet mask
automatically at the next power-on.
Set the Gateway
You can set this paramter in Auto IP and Static IP modes.
The format of the gateway is nnn.nnn.nnn.nnn; wherein, the range of the first nnn is
from 0 to 223 (except 127) and the ranges of the other three nnn are from 0 to 255.
You are recommended to ask your network administrator for a gateway address
available.
Press Gate and use to input the desired gate address. This setting will be saved
in the non-volatile memory and if “Power-on Recall” is set to “Last” and DHCP and
Auto IP are “Off”, the oscilloscope will load the preset gateway address
automatically at the next power-on.
Set the Domain Name Server
You can set this paramter in Auto IP and Static IP modes.
The address format of the domain name server is nnn.nnn.nnn.nnn; wherein, the