User`s guide

Chapter 13 Store and Recall RIGOL
DS1000Z User’s Guide
13-9
To Create a New File or Folder
The operation of folder is only valid in external storage. Before using external disk,
make sure that the USB storage device is connected correctly.
First, press Storage  Disk.Manage and use to select and open the internal
memory or external disk (“Disk D”). Then, select the desired file type. Last, select the
desired directory under which to create a new file or folder. The default is the root
directory of the USB storage device.
Then, press New File or New Folder to turn on the interface as shown in the figure
below.
Figure 13-2 To Create a New File or Folder
This oscilloscope supports Chinese/English input method. The file name or folder
name can contain letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 64 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn
to select the desired content and press down to input the content
selected.